Cubic all-aluminum chassis itx case

Description

Most large air-cooled radiators with a height of less than 170mm can be used. The example in the photo is Lucifer K2!

Notes on choosing a radiator

1. The total height of the radiator should not exceed 170mm

2. The radiator and the graphics card will not conflict with each other, but it may conflict with the power supply, so you need to consider that after the radiator is installed,
the horizontal distance between the front vertical surface of the radiator and the front edge of the motherboard should not be less than 20mm

 

Main features:

1. Install SFX power supply, ITX motherboard computer case

2. Can install two 2.5 hard disks or one 2.5 plus one 3.5 hard disk, or install the dual 2.5-inch hot-swappable hard disk box and one 2.5-inch hard disk in my picture

3. Two expansion slots at the rear, can install graphics cards up to 220 mm long!

4. All-aluminum structure, easy to disassemble and assemble, very solid workmanship, suitable for DIY use.

5. The front panel adopts a concealed structure, with no screw holes on the surface, beautiful and generous.

6. Unique and exquisite shape

7. Air duct optimization, efficient heat dissipation

 

It does not include power supply,

motherboard hard disk, dual 2.5 hot-swappable hard disk box (a cover is provided for this square hole),

just a complete chassis

External dimensions: width 239MM, height 230MM, depth 245MM

Front panel thickness 8MM, rear panel is divided into two pieces, the lower one is made of 15mm aluminum plate CNC processed, the upper one is made of 3mm thick aluminum plate.

Upper and lower panels 4MM, left and right side panels thinnest part 5MM

Total weight 4.75 kg

 

Accessories:

Power socket with adapter cable (power socket is three-in-one with switch),

Start switch board set (already welded, including 2 LEDs and plug wires),

Switch button,

USB3.0,

3M self-adhesive machine feet

4 3X8+3 copper pillars (for installing the switch board on the front panel)

4 3X10+6 copper pillars (for installing the motherboard)

A set of screws (including 4 American standard M3.5 screws for SFX power supply installation)

The following is a physical installation diagram. The installation of this chassis still needs to be in a certain order, otherwise frequent disassembly and assembly will cause trouble.

1. First install the CPU fan and memory stick on the motherboard.
2. Then install this motherboard on the bottom plate of the chassis
3. Disassemble the top plate, power partition, and 2 rear panels of the chassis
4. Install the SFX power supply, hard disk and hard disk box on the partition, and insert the partition into the chassis card slot
5. Then install the bottom plate with the motherboard installed to the bottom of the chassis, and install the bottom plate screws
6. Then install the graphics card, and plug in the internal motherboard power supply line, startup and indicator light line, and graphics card power supply line
7. Install the lower half of the rear panel
8. Install the top of the graphics card baffle and the rear panel Fix the screws
9. Install the power adapter cable to the back panel, pass it through the wire hole of the partition and plug it into the SFX power input socket (special note, the yellow wire of the power conversion cable provided by us is the ground wire, and there will be a contact danger if it is connected incorrectly!)
10. Remove the two small baffles on the side, plug in the hard disk cable and power supply cable, (some motherboards require the hard disk data cable to be plugged in before installing the graphics card)
11. Use a strap to fix the internal wiring of the chassis
12. Install the two small ventilation baffles on the side and install the fixed cover